Iscar is introducing Penta 34 carbide inserts with a innovative PB chipformer. The PB chipformer includes a single cavity by having a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer using a different frontal edge.
The revolutionary chipformer was developed for machining soft materials. It is an superb solution for parting bearing steel and other tremendously ductile materials. It can be used at low feed: 0.03 to 0.10 mm/rev.
The combination of the new chipformer and IC908 grade provides exceptional chip breaking and tool life results. The Penta 34-PB is available in a 1.5 to 3.0 mm width range, made from the resilient IC908 PVD coated grade. The completely new family extends the application range of Iscar's most efficient grooving and parting PENTA 34 carbide inserts. The Penta 34-PB, when examined to a competitor's tool, is a winning solution for machining any soft and ductile material.
Iscar's Upgrades for Parting
Iscar has developed a revolutionary family of reinforced Tang-Grip blades for the celebrated TRAUB (TNL and TNK models) and INDEX (MS18C model) turn/mill machines. These blades, due to their reinforced composition, can be used in long overhang. Only the part of the blade required for penetration (cutting depth) has a reduced width. The remainder is thick, which provides upgraded rigidity and stiffness. These blades are an remarkable solution for parting and grooving between the main and sub-spindle of turn/mill machines. The single-ended insert has a very rigid clamping and therefore provides a exceptionally visible advantage over any other system.
Further additions to Iscar's Grip family are Do-Grip carbide inserts fashioned from the brand new Sumo Tec carbide grades: IC807 IC808 and IC830. The new Sumo Tec grades unquestionably increase insert life, due to the greatest advanced coating technology followed by a specialized surface treatment. This also provides improved tool life due to lowered surface stress and an uniformly coated top surface. The level surface contributes to smooth uninterrupted chip flow, less generated heat and less friction. The new process promotes toughness and chipping resistance and thus lowers friction and built-up edge. This in turn expands and prolongs tool life at increased machining conditions for all types of work piece materials. The new PVD process is composed of Iscar's AL-TEC coating technology, employing the unique surface treatment.
Iscar's Chip Splitting Inserts
Iscar's unique HM90 APCR 220605-CS grooved carbide inserts put an end to chip clogging complications in rough milling of aluminum, where chips can pile up. They are a part of Iscar's growing Helialu HM90 line of inserts tailored particularly for aluminum milling. With 2 grooves pressed into all polished cutting face, the inserts split aluminum chips into a manageable size for easy, reliable evacuation despite the application's characteristic immense chip volume. The 22 mm inserts, each with 2 edges, are designed to amplify metal removal over the comprehensive range of aluminum roughing conditions, from high power/low speed to high power/high speed. They work especially well with Iscar's cutting edge HM90 EAL/FAL...22 aluminum rough milling cutters. Besides dependably clearing chips, the inserts conserve power and diminish chatter in long-overhang setups. The inserts feature a cavity on the bottom to be certain correct mounting in cutter chip pockets equipped with conventional spring pins. For excellent chip control, Iscar advocates using the HM90 APCR chip-splitting insert only in cutters with an even number of flutes.
Iscar Adds Their Latest Innovations To A Long Line Of Prospering Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
A Couple Of The Countless Advancements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
The Most Recent In Carbide Endmill Configuration In A Extended And Prospering Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Iscar Releases A Revolutionary Family Of Slitting Cutters Applying Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.
Revolutionary End Mills By Iscar Will Amplify Productivity While Decreasing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Commence A Brand New Career And Opt For Automotive Manufacturing Jobs.
There is no point in denying that workers serving in the automotive industry are also suffering from the economic recession that everybody is experiencing world wide.
What Vehicle Engineering Careers Do.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.
Push Pull Testing For Highway Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Proof To Testing Requirements.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards. |
